Yamaha PSR-510 Electronic Keyboard User Manual


 
59
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
+
1
_ _
9
+
1
_ _
9
Clock Mode
Reception of an external MIDI clock signal can be enabled or disabled as required. When disabled, all of the
PSR-510s time-based functions (Auto Accompaniment, SONG MEMORY, etc.) are controlled by its own inter-
nal clock, the speed of which is set by the PSR-510 [TEMPO] button. When MIDI clock reception is enabled,
however, all timing is controlled by an external MIDI clock signal received via the PSR-510 MIDI IN terminal
(the PSR-510 [TEMPO] setting has no effect).
NOTES
• If clock reception is enabled but no MIDI clock signal is received for
more than 400 milliseconds, external clock reception is automatically
disable and normal internal clock operation resumes.
• If you attempt to change the tempo setting when MIDI clock reception
is enabled, “EC” will appear on the MULTI DISPLAY.
ZPress the [RECEIVE CH/CL/COM] Button & Select “cL” ....................................................................
Press the [RECEIVE CH/CL/COM] button, then use the [+] and []
buttons, the number buttons, the data dial, or the [RECEIVE CH/CL/
COM] button itself to select cL on the MULTI DISPLAY (cL is the
next step above MIDI channel 16).
XSelect the Desired Mode ........................................................................................................................
Use the [+/] button in the number-button row to select the desired start
mode. The start/stop modes are selected in sequence each time the [+/]
button is pressed, and the selected mode number appears on the left digit of
the MULTI DISPLAY.
RECEIVE
CH/CL/
COM
MODE
................
0 RX OFF
1 MULTI
2 REMOTE
3 CHORD
4 ROOT
Mode number
XSelect the Desired Mode ........................................................................................................................
Use the [+/] button in the number-button row to select the desired clock
mode. The disable and enable modes are selected alternately each time the
[+/] button is pressed, and the selected mode appears on the left digit of
the MULTI DISPLAY (d for disable; E for enable).
Clock mode
Start/Stop Mode
This function determines the effect of external MIDI start and stop signals. There are three start/stop modes,
as follows:
Mode “0” Start/stop reception disabled.
Mode “1” MIDI start and stop commands start and stop the PSR-510 Auto Accompaniment feature.
Mode “2” MIDI start and stop commands start and stop the PSR-510 SONG MEMORY feature.
ZPress the [RECEIVE CH/CL/COM] Button & Select “cd” ....................................................................
Press the [RECEIVE CH/CL/COM] button, then use the [+] and []
buttons, the number buttons, the data dial, or the [RECEIVE CH/CL/
COM] button itself to select cd on the MULTI DISPLAY (cd is the
next step above cL or the next step
below MIDI channel 1).
RECEIVE
CH/CL/
COM
MODE
................
0 RX OFF
1 MULTI
2 REMOTE
3 CHORD
4 ROOT