6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
HEADPHONES/
AUX OUT
■ Using Headphones Or an External Sound System
■ The Sustain Pedal
An optional Yamaha FC4 or FC5 footswitch can be plugged into the
rear-panel SUSTAIN PEDAL jack. The sustain pedal functions as a damper
pedal, controlling sustain. Press the pedal to sustain notes after the keys are
released.
NOTES
• Be sure that you do not press the pedal while inserting the plug
into the SUSTAIN PEDAL jack or while turning the power on. If
you do, the ON/OFF status of the footswitch will be reversed.
This function has been implemented to allow either press-to-
make or press-to-break contact type footswitches to be used with
the PSR-510.
Preparation
A standard pair of stereo headphones can be plugged into the rear-panel
HEADPHONES/AUX OUT jack for private practice or late-night playing.
The internal speaker system is automatically shut off when a pair of head-
phones is plugged into the HEADPHONES/AUX OUT jack. The HEAD-
PHONES/AUX OUT jack can also be used to deliver the output of the
PSR-510 to a keyboard amplifier, stereo sound system, mixing console or
tape recorder.
■ The Music Stand
Stereo sound
system
SUSTAIN PEDAL
Insert the bottom edge of the music stand into the slot located at the rear
of the PSR-510 control panel.