Filter
Top Products
02: Modify Velocity
Increases or decreases the velocity values of all notes in the specified user phrase.
The
“Phrase”
parameter selects the user phrase to be affected by the Modify
Velocity job: “001” ... “100”.
The
“rate”
parameter sets the ratio between the lower and higher velocity
values. A setting of “100%” maintains the original relationship between the
notes, lower values produce a narrower dynamic range, and higher values
produce a broader dynamic range. The range is from “0%” to “200%”.
The “offset” parameters determines the amount of velocity change. “-”
settings reduce the velocity while “+” settings increase the velocity. The range
is from “-99” through “0” to “+99”.
The Modify Velocity job is
a great way to “soften” the
sound of material that has
too great a variation between the
softest and loudest notes, or, con-
versely, to add extra punch to dull-
sounding material. Experiment with
the parameters to get a feel for what
they do.
New Velocity = Original Velocity x rate/100 + offset
(If the right side of the equation is less than 0, the New Velocity becomes 1.)
After setting the parameters as required press
[ENTER]
to execute the Modify
Velocity job. The metronome icon will appear on the display while the data is
being processed, then “Completed” will appear briefly when the job is done.
Press the
[F6]
key (“Exit”) to return to the job list, or a mode key to go directly
to the selected mode.
03: Modify Gate Time
Increases or decreases the gate times (length) of all notes in the specified user
phrase.
95