Filter
Top Products
Pitch Bend
Pitch bend events can be used to produce pitch bend effects. The amount of
pitch bend produced by each event can be set from “-8192” through “+00” to
“+8191”. Each increment corresponds to a fraction of a semitone. To produce
smooth pitch bends you’ll need to insert several small pitch bend events,
appropriate spaced, to create smooth pitch bend effects. Remember to use
more pitch bend effects to return the pitch to normal after a bend. The pitch
bend insert display also features bar graph which indicates the amount of pitch
bend applied — positive bends move ‘the bar to the right and negative bends
move the bar to the left.
“PC”: Program Change
Program change events can be used to switch voices at any point in the track.
The program change parameter has three sections: The MSB (most significant
byte) of the bank select number, the LSB (least significant byte) of the bank
select number, and the program change number itself. The bank select number
parameters can be set from “000” through “127”, while the program change
number parameter can be set from “001” through “128”. The bank select
parameters are only useful if you’re sending program change data to an exter-
nal device that recognizes bank select numbers. Normally you’ll use only the
program change number. Using the program change number (the bank select
parameters should be set to “000”) you can select internal voices “001” through
“128”. The name of the selected voice will appear to the right of the program
change number.
109