Filter
Top Products
06: Shift Note
Changes the pitch of all specified notes within the specified range of measures
in the specified track.
The
“TR”
parameter selects the track to. be affected by the Shift Note job:
“01” ... “16”.
The
“M”
parameters above the graphic bar are used to specify the first
measure:beat and last measure:beat of the range to be modified.
The source note parameter determines which notes in the specified measure
range will be shifted, and the destination note parameter determines to what
note they will be shifted. to. The range of both parameters is from “C-2” to
“G8”. The notes can be enter via the micro-keyboard, the data dial, or the
[-1/NO]
and
[+1/YES]
keys.
After setting the parameters as required press
[ENTER]
to execute the Shift
Note job. The metronome icon will appear on the display while the data is
being processed, then “Completed” will appear briefly when the job is done.
Press the
[F6]
key (“Exit”) to return to the job list, or a mode key to go directly
to the selected mode.
41