Filter
Top Products
The Mark/Jump Function
The mark/jump function lets you “mark” (memorize) up to 10 locations within
the current song and “jump” to any one of the marked locations in one easy
step.
Marking a Location
To mark the current location, press the
[F4]
function key (“Mark”). This calls
the Mark/Jump display.
When the Mark/Jump display appears, make sure the cursor is located at a
clear number (“2” in the example display above) and press
[ENTER].
This
records the current measure/beat location in the specified Mark/Jump number,
and returns you to the SONG mode.
Jumping to a Marked Location
To jump to a marked location, press the
[F6]
key (“Mark”) from any other
location, move the cursor to the appropriate Mark/Jump number (or enter the
Mark/Jump number via the numeric keypad), and press
[ENTER].
You will
immediately be returned to the SONG mode at the specified location.
Clearing a Marked Location
To clear a marked location go to the Mark/Jump display, move the cursor to
the Mark/Jump number you want to clear, and press the [F1] function key
(“Clear”).
11