Filter
Top Products
•
If more than 1 measure
is split and a “Fill” is
specified as the destina-
tion section, an “Illegal Input” error
will occur since fills can only be one
measure long.
• This job does not copy voice
or play effect data from the
source style.
The upper
“Style”
parameter selects the source style — i.e. the style which is
to be split: “001” ... “100”.
The upper
“Section”
parameter selects the source section — i.e. the sec-
tion of the source style which is to be split: “Intro”, “MainA”, “MainB”,
“FillAA”, “FillBB”, “FillAB”, “FillBA”, “Ending”.
The “
M”
parameter specifies the measure at which the source section of
the source style is to be split: “1” ... “8”, depending on the length of the source
style (if “1” is selected the entire section is moved to the specified destination).
The lower
“Style”
parameter selects the destination style — i.e. the style
to which the latter half of the split source section is to be moved: “001” ...
“100”.
The
lower
“Section”
parameter selects the destination section
—
i.e. the
section of the destination style to which the latter half of the split source
section is to be moved: “Intro”, “MainA”, “MainB”, “FillAA”, “FillBB”,
“‘FillAB”, “FillBA”, “Ending”.
After setting the parameters as required press
[ENTER]
to execute the Split
Pattern job. The metronome icon will appear on the display while the data is
being processed, then “Completed” will appear briefly when the job is done.
Press the
[F6]
key (“Exit”) to return to the job list, or a mode key to go directly
to the selected mode.
04: Init Play Effect
Resets all playback effect settings for the specified track to their default values.
The
“TR”
parameter selects the track(s) to be affected by the Init Play Effect
job: “1” ... “8” for individual tracks, or “All” for all tracks.
After setting the parameter as required press
[ENTER]
to execute the Init Play
Effect job. The metronome icon will appear on the display while the data is
being processed, then “Completed” will appear briefly when the job is done.
Press the
[F6]
key (“Exit”) to return to the job list, or a mode key to go directly
to the selected mode.
89