Filter
Top Products
34
Operation Guide
◆
Adjusting the microphone input gain
5.Press the cursor [ ] key to cause the UTILITY menu LED
to light up.
The display switches to the Utility. This menu serves for making
general PS-02 settings.
6.Press the [EDIT] key and then use the curso [ ]/[ ] keys
to bring up the indication "MIC-G" on the display.
The current microphone input gain setting is shown at the top right of
the display.
This setting is only effective when the microphone input patch is selected.
7.Use the cursor [ ]/[ ] keys or slider 1 to adjust the
microphone input gain (Lo or HI).
• When using the built-in microphone
• Lo
This is a gain setting for on-mic recording. It is suitable for
holding the PS-02 in your hand while doing a vocal, or for
placing the PS-02 very close to an acoustic guitar (about 30 cm
from the sound hole).
• HI
This is a gain setting for off-mic recording, such as when
capturing an entire band in a studio.
PATTERN CHORD
RECORD MIXDOWN