Filter
Top Products
67
from the [INPUT] jack, [AUX IN] jack and the built-in microphone also
can not be used.
When a patch that uses "MIXEFX" is selected, the " " (mic icon)
flashes on the display.
◆
MICPRE
The "MICPRE" effect type lets you use the DRIVE module as a
preamplifier for microphone input. The signal can either be from the
built-in microphone or a microphone connected to the [INPUT] jack.
When you select "MICPRE" as effect type of the DRIVE module, the
microphone input gain setting (MIC-G) of the Utility page becomes
effective (
➝
page 71). Therefore, if you select a patch where the " "
(mic icon) lights up while a guitar, synthesizer, or similar instrument is
connected, the sound will be distorted due to input overload.
When the "MICPRE" patch is selected, the " " (mic icon) appears on
the display.
The PS-02 incorporates an auto-chromatic tuner for guitars. To use the
tuner function, the built-in effects must be bypassed (temporarily turned
off) or muted (original sound and effect sound turned off).
1.At the Effect, Song, Rhythm, or Audio menu, press the
[BYPASS (TUNER)] key.
When you press and immediately release the [BYPASS (TUNER)]
key, the unit is set to the bypass condition, and the indication
"BYPASS" appears on the display.
Using the bypass (mute)/tuner function
Mic icon
Mic icon