Filter
Top Products
Special Operations
Special Operations
75
This section explains how to format a newly purchased SmartMedia card
to create a work SmartMedia, and how to force format a SmartMedia
card that has become unreadable.
If the SmartMedia supplied with the PS-02 is damaged or lost, the
system files contained on the card will no longer be accessible, and the
PS-02 will no longer be able to start up correctly. Therefore we strongly
recommend that you create a work SmartMedia as described below.
(32MB or higher is recommended).
1.With the supplied SmartMedia inserted in the PS-02, turn
power to the PS-02 on.
The PS-02 starts up and the Song menu is displayed.
2.Remove the SmartMedia from the [DATA CARD] slot of the
PS-02.
The indication "NOCARD" appears on the display.
3.Insert a new SmartMedia card into the [DATA CARD] slot
of the PS-02.
The indication "FOMAT?" appears on the display.
If the indication "LOAD" flashes on the display after the SmartMedia was
inserted, the card has already been formatted by the PS-02. Verify whether
the desired card was inserted. (Pressing the [STORE (EXECUTE)] key in this
condition will cause the PS-02 to start up from this card.)
4.To carry out the formatting process, press the [STORE
(EXECUTE)] key.
Creating a Work SmartMedia