Filter
Top Products
Editing a Song
ZOOM RT-223
47
When the copy process is completed, the
indication “DONE” appears, and the RT-223
returns to the song mode. If you press the [EXIT]
key instead of the [INSERT/COPY] key, the
process is canceled and the RT-223 returns to the
song mode.
Erasing a song
You can erase the contents of the currently
selected song, returning it to the blank state.
NOTE
An erased song cannot be restored. Use
this function with care.
1.
In song mode, select the song to
erase.
2.
Press the [DELETE/ERASE] key.
The [DELETE/ERASE] key flashes, and the song
name/number indication and the indication
“DELETE” are shown alternately on the display.
3.
To carry out the erase process,
press the [DELETE/ERASE] key
once more.
When the erase process is completed, the
indication “DONE” appears, and the RT-223
returns to the song mode. If you press the [EXIT]
key instead of the [DELETE/ERASE] key, the
process is canceled and the RT-223 returns to the
song mode.
Assigning a name to a song
When you have selected an empty song and
created a new song, the name “SONGxxx” (where
xxx is the song number) will automatically be
assigned to it. You can change this name later.
1.
In song mode, select the song
whose name you want to change.
2.
Press the [EDIT] key.
The currently selected character of the song name
flashes.
3.
Use the cursor left/right keys to
move the cursor position, and use
the VALUE [+]/[-] keys to select the
character.
For information on available characters, see page
33.
4.
Repeat step 3 until the name is
complete.
5.
When name input is completed,
press the [EXIT] key.
The name is accepted, and the RT-223 returns to
the song mode.
Song name Song number
JGLEMAN
1
JGLEMAN
1
RT223(E).fm 47 ページ ２００５年５月２６日 木曜日 午後１２時３分