Filter
Top Products
ZOOM RT-223
63
Changing Various Settings of the RT-223
The [FUNCTION] key is used to make various settings for the RT-223. The basic steps for using the
[FUNCTION] key and the setting items are described below.
Basic function setting
procedure
The [FUNCTION] key is used in the same way
for most setting items. The basic steps are as
follows.
1.
Press the [FUNCTION] key.
The [FUNCTION] key flashes, indicating that
you can select a setting item.
NOTE
For some items, you must first select the
pattern before pressing the [FUNCTION]
key, or you must first stop playback. For
details, see the description of the
respective items.
2.
Depending on the desired item,
press one of pads 1 - 13 or the
[PATTERN] key.
The 13 pads on the top panel and the [PATTERN]
key are used to select items. The item is identified
by the label below the pad or key, as given in
brackets in the following list.
• Pad 0 (BASS KEY)
Sets the reference pitch for the bass program as
well as the pattern root.
• Pad 1 (MIX)
Sets the drum track/bass track level.
• Pad 2 (BASS TUNE)
Allows tuning a bass program.
• Pad 3 (TIME SIG)
Sets the time signature of the pattern.
• Pad 4 (PRE COUNT)
Switches pre-count on or off and sets the
number of beats.
• Pad 5 (QUANTIZE)
Sets the quantize value.
• Pad 6 (CLICK VOL)
Sets the metronome volume.
• Pad 7 (BAR LENGTH)
Sets the number of measures for the pattern.
• Pad 8 (FOOT SW)
Sets the foot switch function.
• Pad 9 (SWING)
Sets the amount of swing for playback.
• Pad [+] (PAD SENS)
Adjusts the pad sensitivity.
• Pad [x] (SHIFT)
Shifts the playback timing backwards or
forwards.
• Pad [()] (MIDI)
Sets reception of MIDI synchronization
messages on and off and assigns the MIDI
channel for each track.
•[PATTERN] key
Serves to display remaining memory capacity.
NOTE
For some items, the sound or track that is
to be set must be selected after selecting
the item.
3.
Use the VALUE [+]/[-] keys to
change the setting.
HINT
• Keeping a VALUE [+]/[-] key depressed
changes numbers continuously.
•To change numbers quickly, hold down
one of the VALUE [+]/[-] keys and press
the other key. The numbers will change
rapidly.
•
When you change a function setting, the
RT223(E).fm 63 ページ ２００５年５月２６日 木曜日 午後１２時３分