Filter
Top Products
RT-223 Appendix
ZOOM RT-223
74
Reverb Module
Parameter description
Parameters
EFFECT
ON/OFF
HALL
PRE DLY DECAY EQ H EQ L DAMP E/R MIX DR SEND BS SEND KICKDRY EFX LVL
Produces concert hall type reverberation.
EFFECT
ON/OFF
ROOM
PRE DLY DECAY EQ H EQ L DAMP E/R MIX DR SEND BS SEND KICKDRY EFX LVL
Produces room type reverberation.
EFFECT
ON/OFF
SPRING
PRE DLY DECAY EQ H EQ L DAMP KICKDRY BS SEND KICKDRY EFX LVL
Simulates a spring reverb.
EFFECT
ON/OFF
PLATE
PRE DLY DECAY EQ H EQ L DAMP KICKDRY BS SEND KICKDRY EFX LVL
Simulates a plate reverb.
EFFECT
ON/OFF
DELAY
TIME FB DAMP PAN KICKDRY BS SEND KICKDRY EFX LVL
Delay with up to 700 ms delay time.
EFFECT
ON/OFF
CHORUS
LFO TYP DEPTH RATE PRE DLY KICKDRY BS SEND KICKDRY EFX LVL
Adds modulation and spread.
EFFECT
ON/OFF
FLANGER
DEPTH RATE FB LFO SFT KICKDRY BS SEND KICKDRY EFX LVL
Adds an undulating sound with strong character.
Parameter name
Setting range Parameter description
EFFECT ON/OFF
ON, OFF
Controls effect ON/OFF for each patch.
TYPE
HALL, ROOM , SPRING, PLATE, DELAY,
CHORUS, FLANGER
Selects from seven available types.
LFO TYP
Mn, St
Sets LFO phase to Mn (Mono) or St (Stereo).
LFO SFT
0 - 180
Sets the left/right phase difference.
DEPTH
0 - 10
Sets the effect depth.
RATE
CHORUS : 1 - 30
Sets the effect rate. When set to "tx" or "Mx", rate is
synchronized to rhythm tempo (see next page Table 1).
FLANGER : 1 - 30, t0 - t9, M1 - M4
PRE DLY
CHORUS : 1 - 30
Sets the predelay.
HALL, ROOM, SPRING, PLATE : 1 - 100
TIME
1 - 700, t0 - t7
Sets the delay time in 1-ms steps. When set to "tx", delay time
is synchronized to rhythm tempo (see next page Table 1).
FB
DELAY : 0 - 10
Sets the feedback amount.
FLANGER : -10 - 10
DAMP
0 - 10
Sets the high-range attenuation of the reverb sound and delay
sound.
PAN
L10 - L1, 0, r1 - r10
Sets the stereo position of the delay sound.
DECAY
1 - 30
Sets the reverb time.
EQ H
-12 - 6
Controls the high-range level of the effect sound.
EQ L
-12 - 6
Controls the low-range level of the effect sound.
E/R MIX
0 - 30
Sets the level of the initial reflection.
KICKDRY
ON, OFF
Switches KICK (bass drum) effect processing for pad 0 ON/
OFF.
DR SEND
0 - 100
Adjusts the drum effect sound send level.
BS SEND
0 - 100
Adjusts the bass effect sound send level.
EFX LVL
0 - 30
Sets the effect sound mix amount.
RT223(E).fm 74 ページ ２００５年５月２６日 木曜日 午後１２時３分