A SERVICE OF

logo

bridge mpla mode
325
Procedure
1
To enable MultiPoint Link Aggregation on the switch, use the
bridge
mpla mode enable
command.
To disable MultiPoint Link Aggregation on the switch, use the
bridge
mpla mode disable
command.
2
Select the ports that you want to be part of the multipoint aggregated
link using the
bridge trunk define
command, as described in
Chapter 11
.
3
Reboot the switch to implement the multipoint aggregated link selection.
On reboot, existing trunks and VLANs are deleted, and the default VLAN
is restored.