qos control define
715
Procedure
1
Enter a control number.
The valid range is
5
through
50
, with the next available number as the
default.
2
Enter a control name.
3
Enter the rate limit type:
none
,
receivePort
, or
aggregate
.
The default is
none
. To drop all conforming packets for a set of ports, use
receivePort
or
aggregate
, set the rate limit to
0
, and specify the
appropriate set of ports.
You can apply aggregate rate limits only to flow classifiers.
4
For the
receivePort
or
aggregate
limit type, enter the service level
for conforming packets as
high
,
best
, or
low
.
For the
none
rate limit type, enter the service level for conforming
packets as
high
,
best
,
low
, or
drop
.
The default is
best
(best effort)
.
If you use
drop
, the system drops all traffic on all ports for the classifier
that is associated with the control. Ping packets are ICMP, not UDP/TCP, so
they are not dropped.
5
Specify whether the conforming packets are loss eligible (
yes
or
no)
.
The default is
no
.
6
If you have selected
receivePort
or
aggregate
for the rate limit
type, you are prompted for the following information:
a
Enter the service level for
excess
packets (
high
,
best
,
low
, or
drop
).
The default is
best
.
b
Specify whether excess packets are loss eligible (
yes
or
no
).The
default is
yes
.
c
Specify how the rate limit is expressed (
percentage
of port
bandwidth or
KBytes/sec
.
KBytes/sec
is the default.
Every weekday Starting time (hh:mm)
Ending time (hh:mm)
Every weekend Starting time (hh:mm)
Ending time (hh:mm)
Input Time Type Options
