ipx rip policy modify
635
✓
3500
✓
9000
9400
3900
9300
ipx rip policy modify
For CoreBuilder 9000: Applies to Layer 3 switching modules only.
Modify an existing RIP (Routing Information Protocol) policy.
Valid Minimum Abbreviation
ipx ri p m
Important Considerations
■
Every router maintains a table of current routing information in a
routing table.
■
Routing protocols receive or advertise routes from the network.
■
Routing Policies control the flow of routing information between the
network, the protocols, and the routing table manager.
Prompt Description Possible Values [Default]
Policy Index number of the policy you
want to modify.
■
1
■
? (to view a list
of selectable
policies)
1 (if only one
policy)
Route
Origin
Origin of the route to which
this policy applies. This
parameter is valid only if the
policy Type is set to Export.
■
Static
■
RIP
■
All
All
Route
address
IPX route to which this policy
applies.
■
0x1-0xfffffffe
■
All
All
IP interfaces One or more IP interfaces on
this router associated with the
RIP policy.
One or more IP
interface numbers
All
Source node
address
6-byte MAC address of the
router that can forward
packets to the segment. A
node address of all zeroes
(
00-00-00-00-00-00
)
means that the route is
connected directly to the
router.
■
A node address
in the format
xx-xx-xx-xx-xx-xx
■
All
All
Policy action Whether this router accepts or
rejects a route that matches
the policy.
■
Accept
■
Reject
Accept
