760
C
HAPTER
24: R
OVING
A
NALYSIS
✓
3500
✓
9000
✓
9400
✓
3900
✓
9300
analyzer remove
Restores the port to be a regular bridge port. Restores the Spanning Tree
state to its state before the port was configured as an analyzer port.
Valid Minimum Abbreviation
an r
Important Considerations
■
Use this command when you no longer need the bridge port for the
analyzer.
■
The analyzer port can not be removed if it still has monitor ports.
■
The port becomes a member of the default virtual LAN (VLAN) when it
is restored (when you remove it as an analyzer port).
■
The port will not be automatically restored to any VLAN it might have
been a member of before it was configured as an analyzer port — you
must do this yourself.
Options
Analyzer Remove Example (3500)
Select menu option (analyzer): remove
Select bridge port {2,7|?}: 7
Prompt Description Possible Values [Default]
Bridge port Number of the bridge port to
which the analyzer is attached
n varies by platform. Only
active analyzer port numbers
are displayed.
■
1 – n
■
? (for a list of
available bridge
ports)
–
