ip rip policy modify
469
✓
3500
✓
9000
9400
3900
9300
ip rip policy modify
For CoreBuilder 9000: Applies to Layer 3 switching modules only.
Modifies an existing route policy for RIP.
Valid Minimum Abbreviation
ip ri pol m
Important Considerations
■
Route policies are classified as follows:
■
Import policies
import routing information from what RIP learns
from a router/neighbor to the unified routing table. (You can also
import routing information from Open Shortest Path First (OSPF).)
■
Export policies
send information from the routing table to RIP and
RIP routers, which controls what is going out on the wire to the RIP
domain. (You can also export from the routing table to OSPF.)
■
The system assigns an index number to each policy that you define.
This index takes into account all route policies set on the system, RIP
and OSPF, so the assigned index can be higher than you may expect.
Options
Prompt Description Possible Values [Default]
Policy type Type of policy
■
import
■
export
import
Origin
protocols
(export)
Whether or not the route is a
static route (for export policies
only)
■
RIP
■
OSPF
■
all
–
Source address IP address of the source router
■
A valid IP
address
■
0.0.0.0
■
all
0.0.0.0
Route address Route that is associated with the
source network
■
A valid IP
address
■
0.0.0.0
■
all
0.0.0.0
Route subnet
mask
Subnet mask that is associated
with the route
A valid mask Based on
source
network (for
example,
255.255.0.0)
