Access Examples
37
Access Examples
The examples in this section show how the top-level menu structure of
the Administration Console changes. The menus that you see in the
Administration Console vary depending on:
■
Which 3Com system you are viewing (as described in “Accessing Your
System” earlier in this chapter).
■
Your level of access.
■
The optional interface modules, switch fabric modules, and other
hardware options that you configure into your system. For example,
you see the
fddi
menu only if you have installed the FDDI module on
your CoreBuilder 3500 system.
These examples show the CoreBuilder 3500 menus. Menus for other
platforms may differ. See the
Command Quick Reference
for your system
for the list of commands on your system.
Administer Access Example
When you enter the Administration Console with
Administer
access, each
menu contains all of the options for the system. Here is an example of a
system
menu for users with
Administer
access on the CoreBuilder 3500:
Select menu option: system
Menu options (CoreBuilder-2B4200): ---------------------------------------------
display - Display the system configuration
console - Administer console-level functions
fileTransfer - Set the file transfer protocol
snapshot - Display all configuration and status information
softwareUpdate - Load a new revision of system software
baseline - Administer a statistics baseline
serialPort - Administer the terminal and modem serial ports
name - Set the system name
time - Set the date and time
nvData - Save, restore, or reset nonvolatile data
clearDiagBlock - Clear the diagnostic block
diagErrLog - Display Diagnose Error Log
sntp - Administer the Simple Network Time Protocol
reboot - Reboot the system
Type "q" to return to the previous menu or ? for help.
--------------------------------------------------------------------------------
Select menu option (system):
