382
C
HAPTER
15: P
ACKET
F
ILTERS
bridge packetFilter
✓
3500
✓
9000
9400
3900
9300
assign
For CoreBuilder 9000: Applies to Layer 3 switching modules only.
Assigns a selected packet filter to a port or set of ports (port group).
Valid Minimum Abbreviation
b pa a
Important Considerations
■
When you assign a packet filter to one or more ports, you must assign
a processing path. The path (transmit all, transmit multicast, receive
all, receive multicast, or receive internal) of a port can have only one
packet filter assigned to it; however, you can assign a single packet
filter to multiple paths and ports.
■
If you try to assign a filter to a port that already has a filter assigned,
the system displays a warning message and the assignment fails.
■
After you assign the filter, ports and paths are removed from the list of
possible values (which are listed in the Options table).
■
Possible values for filters (
n
) depend on the number of created or
loaded filters on the system.
■
Possible values for bridge ports (
n
) depend on the number of existing
bridge ports on the system.
Options
Prompt Description Possible Values [Default]
Select filter Identifier (id
number) of the
filter that you want
to assign
■
1 –
n
■
? (for a list of valid
filter identifiers)
Current valid
selected filter
Select bridge ports Number of the
bridge port to
which you want to
assign the selected
filter
■
1 –
n
■
all
■
? (for a list of valid
ports)
Current valid
selected bridge
port
