ip vrrp mode
499
✓
3500
✓
9000
9400
3900
9300
ip vrrp mode
For CoreBuilder 9000: Applies to Layer 3 switching modules only.
Enables or disables a configured virtual router.
Valid Minimum Abbreviation
ip v mode
Important Considerations
■
You must configure the virtual router before you can enable it.
■
You cannot modify or remove a virtual router that is enabled; you
must disable the virtual router before you can change or delete the
virtual router.
Options
IP VRRP Mode Example
Select menu option: ip vrrp mode
Enter VLAN interface index (2-3|all|?): all
Enter virtual router ID (1-2|all|?): all
Vrid 1 - Enter virtual router mode (enabled,disabled)
[disabled]: enabled
Vrid 2 - Enter virtual router mode (enabled,disabled)
[disabled]: enabled
Prompt Description Possible Values [Default]
VLAN
interface
index
Index number of the virtual
LAN (VLAN) on which you
want to define the virtual
router
■
Index number of a IP
virtual LAN (VLAN)
defined on the
system
■
all
■
? (for a list of
selectable indexes)
Index
number
of first
available
VLAN
VRID Virtual router identifier.
Identifies the virtual router
that you want to define on the
LAN
1 – 255 1
Virtual
router mode
Explicitly turns on or turns off
a configured virtual router
■
enabled
■
disabled
disabled
