3Com Switch 7750 Series
Command Reference Guide – Mirroring Chapter 1 Mirroring Commands
1-9
1.1.7 mirroring-group mirroring-slot
Syntax
mirroring-group group-id mirroring-slot slot-number { inbound | outbound | both }
undo mirroring-group group-id mirroring-slot slot-number { inbound | outbound |
both }
View
System view
Parameter
group-id: Group number of a mirroring group, in the range of 1 to 20.
slot-number: Number of the slot where the mirroring source LPU resides.
Description
Use the mirroring-group mirroring-slot command to configure the mirroring source
LPU.
Use the undo mirroring-group mirroring-slot command to remove the mirroring
source LPU.
Example
# Specify the LPU residing in slot 3 as the mirroring source LPU and mirror all the
packets received on the LPU.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] mirroring-group 1 mirroring-slot 3 inbound
1.1.8 mirroring-group monitor-port
Syntax
mirroring-group group-id monitor-port monitor-port
undo mirroring-group group-id monitor-port monitor-port
View
System view/Ethernet port view
Parameter
group-id: Group number of a mirroring group, in the range of 1 to 20.
monitor-port monitor-port: Specifies the destination port for port mirroring.
monitor-port is available in system view only.
