Filter
Top Products
ARTURIA – JUPITER-8V – USER’S MANUAL
107
9.3 A
SEQUENCE WITH THE
J
UPITER
-8V
In this example, you will discover the basics of programming a sequence on the Jupiter-
8V. This can be done with the «32-step step sequencer». This will be used together with
Galaxy unit and the St Delay effect to create rich and complex rhythmic effects.
Choose the preset «JMB_Sequenced Chords» in the project «JMB». This sound uses
VCO2 tuned to a dominant 7th and is very «brilliant». This will be a starting point for our
third preset.
Open the interface of the «Sequencer» situated in the upper panel of the Jupiter-
8V. Click on the «Sequencer» button.
Open the interface of the «Sequencer»
Click on the first list «Output» (situated to right of the sequencer) and choose «VCF
Cutoff»
Choose «VCF Cutoff»
Increase the value of the intensity of this modulation while turning the knob to the
right.
Increase the amount of modulation