Filter
Top Products
13 X32 COMPACT DIGITAL MIXER User Manual
2.2 Input Channel Banks (11) Layer Select – Select either the channels 1-8, 9-16, 17-24,
25-32, Aux in 1-6/USB REC, Eects Returns, Bus 1-8, or Bus 9-16.
Thecurrently active layer will light.
(12) Select – Press this button to select an input or bus (depending which layer
is active) and allow it to be edited by the Channel Strip and Main Display.
(13) Channel Meter – This displays the signal level of the input or bus
(depending which layer is active). The Gate and Comp LEDs light to indicate
that noise gate and/or compression are active.
(14) Solo – Press this button to send the channel to the Solo Bus.
(15) Mini Display – Information such as channel number,
nickname,inputsource and graphical icon are displayed on this
colorLCDscreen.
(16) Mute – Press this button to mute the channel.
(17) Fader – Use this to adjust the channel volume or bus send in ’Sends on
Faders’ mode. The faders will automatically display the current status as
layers and functions are changed.
(13)
(14)
(15)
(16)
(17)
(12)
(11)
2.3 Display
(21)
(22)
(18) (19) (20)
(18) Push Encoders – These 6 controls adjust the parameters presented at the
bottom of the Main Display. The editable function will show a circular icon
in the display when continuous control is available. The function will show a
broad rectangular icon to indicate that a switch or toggle can be accessed by
pushing the encoder.
(19) Layer Buttons – Some screens in the Main Display have more than
6editable parameters which can be accessed by pressing the Layer Up or
Down buttons.
(20) Page Select Buttons – Use these to scroll through the available screens or
to conrm/decline certain actions.
(21) Main/Solo Meters – The main stereo output level is displayed here along
with the solo level of all channels whose Solo button is active.
(22) Category Select Buttons – Press one of these buttons to jump directly to
the subject you wish to edit or congure.
NOTE - See Chapter 7 for detailed descriptions of each screen.