Filter
Top Products
Confirming Common Parameter Settings
E-23
English
■ 4-B, 4-C, 4-D, 5-B, 5-C, 5-D Settings when Asgn1/Asgn2 = Control Change Number 0 to 127
Parameter Name Location Description Settings (* indicates default)
Channel (Ch) 4-B, 5-B Specifies the MIDI channel
*1
for sending
control changes.
1
*
to 16
Value (Button OFF)
(OfVal)
4-C, 5-C Specifies the value sent when the button is
released (turned off).
0
*
to 127
Value (Button ON)
(OnVal)
4-D, 5-D Specifies the value sent when the button is
pressed (turned on).
0
*
to 127
*1 Control change information in principle is sent from the Digital Piano to an external destination over the MIDI
channel specified here. However, when a MIDI send channel of one of the Digital Piano’s zones matches the
channel specified here and that zone is configured as INT ON, control change information is sent for the internal
sound source that corresponds to that zone.
■ 5-B Settings when Asgn2 = DSP Bypass (Dbp)
Parameter Name Location Description Settings (* indicates default)
Zone 5-B This setting can be used to select the zone
(Up1: UPPER 1, Up2: UPPER 2,
Lo1: LOWER 1, Lo2: LOWER 2) that
bypasses the DSP (DSP off) when the
(ASSIGNABLE 2) button is on (lamp lit).
Up1
*
, Up2, Lo1, Lo2