Casio MA1003-A Electronic Keyboard User Manual


 
English
Using Registration Memory
E-37
To recall registration memory bank data
from a file
1.
Depending on where the file is located,
perform one of the steps shown below.
2.
Press the

(REGISTRATION) button so the
lamp below it is lit. This is the
REGISTRATION mode.
3.
If you are recalling a file that contains data for
a single bank, use the

(w, q) buttons to
scroll through the bank numbers (1 through 8)
until the one to which you want to recall the
data is displayed.
If you are recalling a file that contains data for all
banks, you can skip this step.
4.
While holding down the

(FUNCTION)
button, press the

(LOAD/SAVE) button.
This enters the LOAD/SAVE mode.
5.
Depending on the type of operation you want
to perform, use the

(u) and

(i)
buttons to display one of the screens shown
below.
To recall a file that contains data for a single bank
To recall a file that contains data for all banks
6.
Use the

(w, q) buttons to display the
file that contains the data you want to recall,
and then press the

(ENTER) button.
This will cause the message “Replace?” to appear.
To cancel the recall operation and exit the LOAD/
SAVE mode, press the

(EXIT) button.
7.
To replace the registration data currently in
the bank(s) you selected with the registration
data in the file, press the

(YES) button. To
return to the screen in step 6 of this
procedure without recalling anything, press
the

(NO) button.
Pressing the

(YES) button recalls the data from the
file into the bank(s) and exits the LOAD/SAVE
mode.
If the file is located
here:
Perform this operation:
Internal area Remove the SD card from the
Digital Piano’s card slot.
SD card Insert the SD card into the Digital
Piano’s card slot.