Filter
Top Products
General Guide
E-5
English
Sound Source Configuration
The sound source is configured with a total of 36 parts: four parts that correspond to each of the zones, 16 parts for
MIDI file playback, and 16 parts that operate as the multi-timbre sound source during receipt of MIDI input.
The following shows the relationships between parts, ports, and MIDI channels.
Port 0 (Parts played by hand)
*1 MIDI OUT channel depends on zone editing (page E-28).
Port 1 (MIDI file playback parts)
Port 2 (MIDI IN parts)
NOTE
• MIDI messages output from the above Port 0 and Port 1 are grouped and sent from a single MIDI port. Port-
specific send is not supported.
Part Number MIDI Channel Part Name
1 IN:- - / OUT:01-16
*1
Upper1
2 IN:- - / OUT:01-16
*1
Upper2
3 IN:- - / OUT:01-16
*1
Lower1
4 IN:- - / OUT:01-16
*1
Lower2
Part Number MIDI Channel Part Name
17 IN:- - / OUT:01 Song01
...
...
...
32 IN:- - / OUT:16 Song16
Part Number MIDI Channel Part Name
33 IN:01 / OUT:- - Ext.01
...
...
...
48 IN:16 / OUT:- - Ext.16