Filter
Top Products
57
Appendices ~ Appendix F: Serial Commands
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
UID
This command returns the unique ID number, the device type and the
device number of the AP800. This command is read only. The unique ID
number is preprogrammed at the factory and is unique to the unit, while
the device number is set by the user at the time of installation.
[DEVICE] UID
Return Values
UID returns the device type, device number and unique ID number. The
unique ID is composed of an eight-digit hex number assigned at the
factory to uniquely identify the unit.
Example
The following command requests the unit ID from device 11:
#11 UID
The following is returned out the serial port:
#11 UID
VER
This command returns current version of firmware. This version is unique
to a released version of software and is comprised of the DSP, the FPGA,
and HC11 firmware. This command is read only.
[DEVICE] VER
Return Values
VER returns the version of software in the same format as the command.
The Version is composed of a major version number followed by a period
and a minor version number.
Example
The following command requests the software version from device 31:
#11 VER
The following is returned out the serial port:
#11 VER X.X