Euphonix 5B Music Mixer User Manual


 
System 5-B Digital Audio Mixing System Operation Manual Channels and Strips
115
8.4.1 Channel Patch Points
The first configuration page allows sources to be assigned to the Key, A, and B inputs.
Each input has identical controls.
All patch points can be set in PatchNet (see Console I/O on page 40).
To change the source to the A input:
1. Press the A Input knob switch.
A scrolling list appears on the TFT display above the Strip.
2. Use the switches to the left of the knob to display other groups of sources.
These switches function as page up/down keys in this mode.
Each group is an internal digital or MADI connection that can contain up to 56
audio sources. For example, one group could be mic inputs, another inputs
from a digital multitrack machine.
3. When the desired group is located, use the knob to scroll the list to highlight
the correct input.
4. Press the knob switch to select that input.
5. Exit configuration mode by pressing both cfg WX keys simultaneously (they
stop flashing).
8.4.2 Channel Processor Order
Enter the configuration mode as described in Section 8.4 on page 114. Press the cfg X
key to display the processor order page. The current order is indicated by the knob dis-
play (top = first). To change the order:
1. Press the knob switch for the processor to re-order.
The knob LED flashes and the processor order is displayed on the TFT screen
above the Strip. The fader, which becomes the controller to select the order,
jumps to a position that reflects the current order.
2. Move the fader up/down to select that processor’s new position.
The screen changes to reflect the new order.