Filter
Top Products
System 5-B Digital Audio Mixing System Operation Manual CM402 Center Section
80
6.3 Bus Routing Panel
Figure 6-5 Bus Routing Panel
This panel shows the Group and Main Bus routing for channels assigned to the Center
Strip. The Grp Route, Main Route, and Grp Section switches along the bottom of the
panel determine the information being displayed and controlled. These switches intercan-
cel: only one can be lit and active at a time. The Pan To: GRP Busses and MAIN Busses
keys allow panning to the Group and Main busses (lit) or disables panning (unlit).
NOTE: The Reverse Route switch is not currently operational.
6.3.1 Grp Route
When the Grp Route key is lit, all 48 switches indicate Group Bus routing. The green
number LEDs light to indicate the available busses. The switches light to show that the
Center Strip channel is routed to that Group Bus.
6.3.2 Main Route
When the Main Route key is lit, all 48 switches indicate Main Bus routing. The green
number LEDs light to indicate the available busses. The switches light to show that the
Center Strip channel is routed to that Main Bus.
6.3.3 Grp Section
This is the default mode of operation. The top two rows indicate Group Bus routing and
the bottom row indicates Main Bus routing.
Grp
Route
Main
Route
Grp
Section
ABCDEFGH JKPQRSTU
BVU950
33
Re c
17
Re c
1
Rec Rec Rec Rec Rec
34
Re c
18
Re c
2
35
Re c
19
Re c
3
36
Re c
20
Re c
4
37
Re c
21
Re c
5
38
Re c
22
Re c
6
Re c
39
Re c
23
Re c
7
Re c
40
Re c
24
Re c
8
Re c
41
Re c
25
Re c
9
Re c
42
Re c
26
Re c
10
Re c
43
Re c
27
Re c
11
Re c
44
Re c
28
Re c
12
Re c
45
Re c
29
Re c
13
Re c
46
Re c
30
Re c
14
Re c
47
Re c
31
Re c
15
Re c
48
Re c
32
Re c
16
Re c
Repro
All
Input
All
Safe
Record
GRP Buses
Panto:
MAIN Buses Route
Reverse
Record
Machine
Track
Arming