Filter
Top Products
System 5-B Digital Audio Mixing System Operation Manual eMix Application
45
Figure 4-12 Mics Patched to Channels
Patch the multitrack returns into channels 1–24
1. Click on the Device Outputs category to access the outputs from the R-1.
2. Click on the Hub1-3 sub-category.
This is where the R-1 is hardwired.
3. Click and drag through the first 24 cells in the Hub1-3 column.
These cells are highlighted in green and their names appear in the Sources col-
umn in the Selected: window below.
4. Select the Console I/O category.
5. Select the A and B Inputs sub-category.
6. Click and drag through the first 24 cells in the A Input column.
These cells are highlighted in blue and their names appear in the Destinations
column in the Selected: window below.
7. Click the Patch button to make the connection.
The sources and destinations appear in the A Input and Name columns, re-
spectively. The sources and destinations are cleared from the Selected: area.
After connecting the 12 mics and the R-1 returns, the Console I/O A and B Inputs
Window is shown in Figure 4-13.