Filter
Top Products
System 5-B Digital Audio Mixing System Operation Manual Control Groups and Multi Format Masters
127
2. Select the channels to include in the master channel by left-clicking and dragging
across the desired channels.
The selected channels are now highlighted.
3. Right-click on any highlighted channel to select their channel format.
To group discontinuous channels into a multi-format master, right-click each
channel and select the same format.
In PatchNet, the dynamics automatically link stereo, LCRS, 5.1, 6.1, or 7.1 channels.
Place the master on a channel strip like a normal channel:
1. Press the Masters key from the Main Panel.
2. Select a master channel and assign it to a Strip.
All Multi Format channels have a pan width control activated by the upper switch to the
left of the PanF knob. Multi Format masters can be automated just like a mono channel.
9.3 Spill
The Spill function temporarily assigns the slaves channels of a Control Group or Multi-
Format Master to predefined Strips. See also Spill Select on page 96.
1. From the Main Panel, press the Strips key.
2. Press the Spill Select key in the Strips Panel so it lights.
3. Press the Wave key on each Strip to include in the Spill area.
4. Press the Chan Select key on a Group of Multi-Format master to spill its slaves
into the selected Spill area.
5. To unspill the slave channels from the Spill area and restore the Strip’s previous
channels, press any master or slave Chan Select key.