Filter
Top Products
HP109-PE – Chapter 5. Changing Various Settings
32
Restoring the Settings to the
Factory Condition (Factory
Reset)
The settings stored in the HP109-PE can be returned to their
factory settings.
* Songs secured with the Song Backup procedure (p. 32) are not
deleted when Factory Reset is executed.
1.
Hold down the [Split] button, and press the
[Chorus] button.
The HP109-PE switches to the set mode.
2.
Press the Key Touch [Touch] button.
The following appears in the display.
3.
Press the [Rec] button.
Factory Reset is executed.
When Factory Reset is finished, the following appears in
the display. Turn off the power at this time.
* Do not turn off the power until “End” is displayed in the
screen. Turning off the power before this is displayed may
damage the HP109-PE’s internal memory, rendering the
instrument unusable.
Remembering the Settings
Even When the Power is
Turned Off (Memory Backup)
Normally, the various settings revert to their default values
when the power is turned off. However, you can specify that
the settings will be remembered even when the power is
turned off. This function is called “Memory Backup.”
* For more on the settings stored using Memory Backup, refer to
“Parameters Stored in Memory Backup” (p. 38).
1.
Hold down the [Split] button, and press the
[Chorus] button.
The HP109-PE switches to the set mode.
2.
Press the [Metronome/Count In] button.
The button’s indicator flashes.
The following appears in the display.
3.
Press the [Rec] button.
Memory backup is executed.
When Memory Backup is finished, the display and but-
tons return to their normal appearance.
Saving Recorded Songs
(Song Backup)
Normally, any songs you have recorded are deleted when
you turn off the power to the HP109-PE. However, if you
wish, you can have such recorded songs be saved even while
the power is turned off. This function is called “Song
Backup.”
* You cannot use the Song Backup function unless you have
recorded song.
1.
Hold down the [Split] button, and press the
[Chorus] button.
The HP109-PE switches to the set mode.
2.
Press the [Song/Tempo] button.
The button’s indicator flashes.
The following appears in the display.
3.
Press the [Rec] button.
Song backup is executed.
When Song Backup is finished, the display and buttons
return to their normal appearance.
* You can select and play songs that have been backed up in the
same way as you do with the built-in songs (p. 13). Songs that
have been backed up are indicated in the display as shown
below.
■
Deleting backed up songs
1.
Hold down the [Split] button, and press the
[Chorus] button.
2.
Press the [Song/Tempo] button.
The following appears in the display.
To cancel the procedure, press the [Play] button.
3.
Press the [Rec] button.
The backed up song is deleted.
The display and buttons return to their normal appear-
ance.