Filter
Top Products
34
Performing
In addition to reverb, you can apply a variety of effects to the HP207’s sounds.
These are referred to as “effects.” With the factory settings, an effect suitable for each
tone is selected.
Effects may not be applied with some of sounds.
fig.Panel-Effects-e.eps
1.
Press the [Effects] button so it’s lit.
Try fingering the keyboard.
The effect is applied to the currently selected tone.
Some tones initially have effect applied. Selecting such a tone makes the [Effects]
button light up automatically.
Turning Off the Effects
1.
Press the [Effects] button so its light is turned off.
Here’s how to edit the settings of the effect.
1.
Hold down the [Effects] button and press the [-] or [+] button.
The screen will show the effect parameters and their values.
fig.d-EffectDepth.eps
• The most suitable type of effect is assigned for each tone.
Depending on settings such as 3D Sound Control, the effect may not be applied in
some cases.
Adding a Variety Effects to the Sound (Effects)
Editing the effect settings
NOTE
NOTE
HP207_e.book 34 ページ ２００６年１２月２５日 月曜日 午前９時５２分