Filter
Top Products
71
Saving Your Performance
7.
Use the [
▲
] [
▼
] buttons to change the character.
8.
When you’ve finished editing the name, press the [ ] button.
A screen in which you can choose the save destination will appear.
Selecting the Save destination for the Song
fig.d-FileSave2.eps
9.
Use the [-] [+] buttons to specify whether you want to save the song in
internal memory (inside the HP207) or external memory (USB memory).
10.
Use the [
▲
] [
▼
] buttons to highlight the save-destination number.
fig.d-FileSave3.eps
11.
Use the [-] [+] buttons to select the save-destination number.
The song name is shown at the right of the number.
Wherever “Unused” is shown as the song name, it means that no song is saved at that number.
Select a number at which no song has been saved.
If you want to erase an unwanted song and replace it with the newly saved song, select the
number of the unwanted song.
Saving the Song
12.
Press the [ ] button.
The song will be saved.
Never turn off the power while “Executing...” is shown in the display. Doing so will
destroy the save-destination memory, rendering it unusable.
If in step 11 you selected a number at which a song has already been saved, the following
confirmation message will appear when you press the [ ] button in step 12.
fig.d-FileSave4.eps
If you decide not to save the song, press the [ ] button.
If you want to erase the previously saved song and replace it with the newly saved song, press
the [ ] button.
NOTE
HP207_e.book 71 ページ ２００６年１２月２５日 月曜日 午前９時５２分