Filter
Top Products
88
Connecting to Other Devices
You can connect audio devices to play the sound of the
HP207 through the speakers of your audio system, or to
record your performance on a tape recorder or other
recording device.
Use phone plug audio cables (sold separately) to make
connections.
1.
Turn the volume all the way down on the
HP207 and on the device you’re about to
connect.
2.
Turn off the power to the HP207 and
connected speakers.
3.
Use audio cables (sold separately) to make the
connection.
4.
Switch on the HP207.
5.
Switch on the connected speakers.
6.
Adjust the volume level on the HP207 and the
connected speakers.
When you play the HP207’s keyboard, the sound is
played from the connected speakers.
Turning Off the Power
1.
Turn the volume all the way down on the
HP207 and on the speakers you’re about to
connect.
2.
Turn off the connected speakers.
3.
Turn off the HP207.
Connecting to Audio Equipment
* When connection cables with resistors are used, the
volume level of equipment connected to the input jacks
may be low. If this happens, use connection cables that
do not contain resistors.
* To prevent malfunction and/or damage to speakers or
other devices, always turn down the volume, and turn
off the power on all devices before making any
connections.
Connecting Speakers to the HP207 and Outputting Sounds
Output Jacks
Amplified Speakers,
Audio System, etc.
Input (Line In)
HP207_e.book 88 ページ ２００６年１２月２５日 月曜日 午前９時５２分