Filter
Top Products
90
Connecting to Other Devices
By connecting an external MIDI device and exchanging
performance data, you can control one device from the other.
For instance, you can output sound from the other instrument
or switch Tones on the other instrument.
When the HP207 is connected to a MIDI sequencer,
set it to “Local Off.” Refer to “Preventing Doubled
Notes When Connected to a Sequencer (Local
Control)” (p. 82).
Making the Connection
1.
Turn the volume all the way down on the
HP207 and on the MIDI device you’re about to
connect.
2.
Switch off the power to the HP207 and the
MIDI device you’re about to connect.
3.
Use a MIDI cables (sold separately) to connect
the MIDI connectors to each other.
4.
Switch on the power to the HP207 and the
connected device.
5.
Adjust the volume level on the HP207 and the
connected device.
6.
You should also set the MIDI transmit channel
as needed.
For details on the MIDI transmit channel, refer to
“MIDI Transmit Channel Settings (MIDI Transmit
Ch.)” (p. 82).
Connecting to MIDI Devices
Connecting a Computer to the
HP207
What’s MIDI?
MIDI, short for “Musical Instrument Digital Interface,” was
developed as a universal standard for the exchange of
performance data between electronic instruments and
computers.
The HP207 is equipped with MIDI connectors to let it
exchange performance data with external devices. These
connectors can be used to connect the HP207 to an
external device for even greater versatility.
MIDI Out/In
connector
OUT
MIDI
IN
Roland MT Series
MIDI cable
Producing Sounds from a MIDI Sound
Module by Playing the HP207
THRU OUT
MIDI
IN
MIDI Sound Module
MIDI Out
connector
MIDI cable
HP207_e.book 90 ページ ２００６年１２月２５日 月曜日 午前９時５２分