Filter
Top Products
68
Saving Your Performance
4.
Press the [ ] button.
The Initialize Media screen will appear.
fig.d-Format.eps
5.
Use the [-][+] buttons to select whether you will initialize Internal Memory,
External Memory (USB memory), or Disk (floppy disk).
6.
Press the [ ] button.
A confirmation message will appear.
fig.d-Format2.eps
If you press the [ ] button, you’ll return to the previous screen without initializing.
7.
Press the [ ] button.
Initialization will begin.
The entire contents of the selected memory will be erased.
Never turn off the power while the screen indicates “Executing...” Doing so will
destroy the memory being initialized, rendering it unusable.
If the screen indicates “Error,” please refer to “Error Messages” (p. 96).
Initializing the HP207’s internal memory will not initialize settings other than the
contents of internal memory. If you want to return settings other than the contents
of internal memory to their factory-set condition, execute the Factory Reset
operation (p. 86).
Don’t disconnect the USB memory until USB memory initialization has been
completed.
While a floppy disk is being initialized, do not eject the disk from the floppy disk
drive or disconnect the cable of the disk drive.
NOTE
NOTE
NOTE
NOTE
NOTE
HP207_e.book 68 ページ ２００６年１２月２５日 月曜日 午前９時５２分