Filter
Top Products
91
Connecting to Other Devices
The following become possible once you connect a USB cable
(available separately) between the USB (MIDI) connector on
the HP207’s rear panel and the USB connector of your
computer.
• You can use the HP207 to play sounds from SMF music
files played back with MIDI software.
• By exchanging MIDI data with sequencer software, you
can save songs recorded with the HP207 to your
computer, and enjoy a variety of musical control and
editing features.
Connect the HP207 to your computer as shown below.
* Refer to the Roland website for system requirements.
Roland website: http://www.roland.com/
If connection to your computer is
unsuccessful...
Normally, you don’t need to install a driver in order to connect
the HP207 to your computer. However, if some problem
occurs, or if the performance is poor, using the Roland
original driver may solve the problem.
For details on downloading and installing the Roland original
driver, refer to the Roland website.
Roland website: http://www.roland.com/
Specify the USB driver you want to use, and then install the
driver. For details, refer to “Changing the USB Driver Settings
(USB Driver)” (p. 84).
Connecting a Computer
USB
connector
USB connector
USB cable
Computer
Caution
• To prevent malfunction and/or damage to speakers
or other devices, always turn down the volume, and
turn off the power on all devices before making any
connections.
• Only MIDI data can be transmitted using USB.
• USB cables are not included. Consult your Roland
dealer if you need to purchase.
• Turn on the power to the HP207 before starting up
MIDI applications on the computer. Do not turn the
HP207 on or off while any MIDI application is
running.
HP207_e.book 91 ページ ２００６年１２月２５日 月曜日 午前９時５２分