Filter
Top Products
Preparations before using the PK-9
10
r
MIDI Pedalboard PK-9
3. Preparations before using the PK-9
Attaching the expression pedal
The PK-9 is shipped with the expression pedal detached. Before connecting the PK-9 to an external device, please attach
the expression pedal.
NOTE
When attaching or detaching the expression pedal, be careful not to step on a knob bolt. When removing the knob bolts, to prevent
accidental ingestion, always keep them out of the reach of small children.
To prevent malfunction and/or damage to other devices, always turn off the power on all devices before making any connections.
1.
Loosen the knob bolt on the rear panel of
the PK-9.
2.
Connect the expression pedal cable to the
connector in the upper part of the PK-9.
3.
While being careful not to pinch the cable,
place the expression pedal on the PK-9.
4.
Use the two supplied knob bolts to fasten
the expression pedal, making sure that the
bolt holes are aligned.
5.
Retighten the knob bolt on the rear panel.
NOTE
The connector in the upper part of the PK-9 is only
intended for connecting the supplied expression pedal.
Connecting any other device than the PK-9’s expression
pedal could result in malfunction.
Knob bolt on rear
panel
Supplied knob bolts
(two places)
PK-9_multi.book Page 10 Monday, April 23, 2012 3:03 PM