Filter
Top Products
17
Introduction
1. Press [MENU].
2. Use [ ] [ ] to select “Demo Play” then press [ENTER].
3. Use the cursor buttons to select the song you want to hear
then press [ENTER].
Press [PIANO (0)] to play back all of the demo songs.
4. Press [START/STOP] to stop demo playback.
5. Press [EXIT] to return to the Main screen.
All rights reserved. Unauthorized use of this material for
purposes other than private, personal enjoyment is a violation
of applicable laws.
No data for the music that is played will be output from MIDI
OUT.
You can return all of Prelude’s settings to the factory-set state.
This is called “Factory Reset.”
If the Prelude’s internal memory already contains important
data that you’ve created, all of this data will be lost when you
execute a Factory Reset. If you want to keep your data, you
must save it to USB memory (p. 48).
1. Press [MENU].
2. Use [ ] [ ] to select “Utility” then press [ENTER].
3. Use the cursor buttons to select “Factory Reset” then press
[ENTER].
The confirmation message will appear.
4. Press [ENTER] to execute the Factory Reset.
If you press [EXIT] instead, you’re returned to the previous
screen and no Factory Reset takes place.
5. Turn the power off and then on again.
Restoring the factory settings will initialize the System and User
Performance settings.
The settings for which you select “ON” (as described below)
will not change even when you switch Performances.
Choosing the settings that will be locked
1. Press the [MENU] button and select “System”.
2. Confirm your choice by pressing [ENTER].
3. Press the [ ] button several times until the “System
Lock” page is displayed.
4. Use [ ] [ ] to select the parameter, and turn the
VALUE dial to select the value.
5. Press [EXIT].
You will see the message “System Write Completed.”
These settings are system parameters (p. 45).
Listening to the Demo Songs
Restoring the Prelude to Its
Factory Settings
Preserving Certain Settings
Even When You Switch
Performances (Lock System)
Parameter
Explanation Value
Style
The Style will not change when you
switch Performances.
OFF, ON
Tone
The Tones will not change when you
switch Performances.
OFF, ON
Style Tempo
The Style tempo will not change
when you switch Performances.
OFF, ON
Transpose
The transpose setting (p. 21) will not
change when you switch
Performances.
OFF, ON
Prelude_e.book Page 17 Wednesday, January 14, 2009 2:18 PM