Filter
Top Products
76
In addition to a Lo-Fi effect, this effect also generates radio noise.
fig.MFX-58
fig.MFX-59
Simulates a sound recorded on an analog record and played back on a
record player. This effect also simulates the various types of noise that are
typical of a record, and even the rotational irregularities of an old turntable.
fig.MFX-60
A stereo pitch shifter.
fig.MFX-61
58: LOFI RADIO
Parameter Value Description
LoFi Type 1–9
Degrades the sound quality. The sound qual-
ity grows poorer as this value is increased.
Filter Type
OFF, LPF,
HPF
Type of filter
OFF: no filter is used
LPF: cuts the frequency range above the
Cutoff
HPF: cuts the frequency range below the
Cutoff
Filter Cutoff 200–8000 Hz Basic frequency of the Post Filter
Radio
Detune
0–127
Simulates the tuning noise of a radio. As this
value is raised, the tuning drifts further.
Radio Noise
Level
0–127 Volume of the radio noise
Balance
D100:0W–
D0:100W
Volume balance between the direct sound
(D) and the effect sound (W)
Level 0–127 Output level
59: TELEPHONE
Parameter Value Description
Voice
Quality
0–15 Audio quality of the telephone voice
Treble -15– +15 dB Bandwidth of the telephone voice
Balance
D100:0–
D0:100W
Volume balance between the direct sound
(D) and the effect sound (W)
Level 0–127 Output level
60: PHONOGRAPH
R in
R out
L in
L out
Lo-Fi
Lo-Fi
Radio
2-Band
EQ
2-Band
EQ
L in
R in
L out
R out
Telephone
Telephone
L in
R in
Phonograph
Phonograph
L out
R out
Balance W
Balance W
Balance D
Balance D
Parameter Value Description
Signal
Distortion
0–127 Depth of distortion
Frequency
Range
0–127
Frequency response of the playback system
Decreasing this value will produce the im-
pression of an old system with a poor fre-
quency response.
Disc Type LP, EP, SP
Rotational speed of the turntable
This will affect the frequency of the
scratch noise.
Scratch
Noise
Level
0–127
Amount of noise due to scratches on the
record
Dust Noise
Level
0–127 Volume of noise due to dust on the record
Hiss Noise
Level
0–127 Volume of continuous “hiss”
Total Noise
Level
0–127 Volume of overall noise
Wow 0–127 Depth of long-cycle rotational irregularity
Flutter 0–127 Depth of short-cycle rotational irregularity
Random 0–127
Depth of indefinite-cycle rotational irregular-
ity
Total Wow/
Flutter
0–127 Depth of overall rotational irregularity
Balance
D100:0W–
D0:100W
Volume balance between the direct sound
(D) and the effect sound (W)
Level 0–127 Output level
61:
PITCH SHIFTER
(Feedback Pitch Shifter)
Parameter Value Description
Coarse -24– +12 semi
Adjusts the pitch of the pitch shift-
ed sound in semitone steps.
Fine -100– +100 cent
Adjusts the pitch of the pitch shift-
ed sound in 2-cent steps.
Delay Time 0–1300 ms, note
Adjusts the delay time from the
direct sound until the pitch shifted
sound is heard.
Feedback -98– +98%
Adjusts the proportion of the
pitch shifted sound that is fed
back into the effect. Negative (-)
settings will invert the phase.
Low Gain -15– +15 dB Gain of the low range
High Gain -15– +15 dB Gain of the high range
Balance D100:0W–D0:100W
Volume balance between the di-
rect sound (D) and the pitch shift-
ed sound (W)
Level 0–127 Output Level
L in
R in
Pitch Shifter
Pitch Shifter
L out
R out
2-Band EQ
2-Band EQ
Prelude_e.book Page 76 Wednesday, January 14, 2009 2:18 PM