Filter
Top Products
18
Before You Start Playing
A song you’ve recorded on the RG-1 can be saved by copying it to separately sold USB memory. You can also copy songs to a
floppy disk using a separately sold floppy disk drive (p. 64).
You can also play back SMF music files or audio files (p. 47) saved on USB memory or a floppy disk.
NOTE
Use USB memory and floppy disk drive available from Roland. Proper operation cannot be guaranteed if other USB device is
used.
If you’re using new USB memory or floppy Disk, you’ll need to initialize (format) it on the RG-1. For details, refer to
“Initializing the User Memory, USB Memory, and Floppy Disks” (p. 76).
1.
Connect the USB memory to the External memory
connector.
fig.ConnectUSBMem.eps
* Carefully insert the USB memory all the way in—until it is
firmly in place.
1.
Attach the floppy disk drive as shown the figure,
using the mounting holes on the RG-1’s bottom
panel.
* For details of the attachment, refer to the owner’s manual of
the floppy disk drive.
fig.00-040
2.
Connect the USB cable included with the floppy
disk drive to the External memory connector on
the RG-1.
Using USB Memory/Floppy Disk
Connecting USB Memory
Installing the Floppy Disk Drive
RG-1_e.book 18 ページ ２００８年４月８日 火曜日 午後２時３６分