Filter
Top Products
72
Changing Various Settings
Connecting the RG-1 to a V-LINK compatible image device
allows you to control the images with the RG-1.
V-LINK
V-LINK ( ) is a function that allows music and
images to be performed together. By using MIDI to connect
two or more V-LINK compatible devices, you can easily
enjoy a wide range of visual effects that are linked to the
expressive elements of a music performance.
1.
Press the [Function] (Exit) button, getting its
indicator to light.
2.
Press the [Song] (Select -) button or [ ] (Select
+) button to display the MIDI screen.
3.
Press the [Song] (Select -) button or [ ] (Select
+) button to get the value for “V-LINK” to flash.
4.
Press the [ ] (Value -) button or [ ] (Value
+) button to switch the V-LINK function on or off.
This is set to “Off” when you turn on the power.
NOTE
While V-LINK is switched on, no sound is produced
when you press any of the twelve keys at the left end of
the keyboard.
→
When the V-LINK function is on, the V-LINK icon ( )
appears on the Song Select screen and Tone screen.
5.
Press the [Function] (Exit) button so the indicator
goes out.
MIDI features sixteen MIDI channels, numbered 1–16.
Simply connecting a cable is not enough for communication
to take place. The connected devices must be set to use the
same MIDI channels. Otherwise, no sound will be produced,
and no sounds can be selected.
The RG-1 receives all channels 1–16.
→
You can use the Memory Backup function to store these
settings to the RG-1 (p. 71).
1.
Press the [Function] (Exit) button, getting its
indicator to light.
2.
Press the [Song] (Select -) button or [ ] (Select
+) button to display the MIDI screen.
fig.07-110d
3.
Press the [Song] (Select -) button or [ ] (Select
+) button to get the value for “Tx Ch” (Transmit
channel) to flash.
fig.07-120d
4.
Press the [ ] (Value -) button or [ ] (Value
+) button to set the MIDI Transmit channel.
5.
Press the [Function] (Exit) button so the indicator
goes out.
For details on connecting MIDI devices, refer to
“Connecting to MIDI Devices” (p. 81).
Using the V-LINK Function
Value
Description
On
The V-LINK function is switched on.
You can control images using the twelve
keys at the left end of the keyboard.
Off
The V-LINK function is switched off.
MIDI Transmit Channel Settings
Value
Off, 1–16
RG-1_e.book 72 ページ ２００８年４月８日 火曜日 午後２時３６分