Filter
Top Products
62
Recording the Performance
Notes Regarding Recording
You can store your recorded performances to the “Favorites” (p. 43). If not
first saved to the “Favorites,” recorded performances are erased when the
RG-1’s power is turned off.
If you want to retain such performances, be sure to save them to the
“Favorites.”
In addition, you can save performance data to USB memory and floppy
disks (p. 64).
1
Select the tone you want to perform with (p. 21).
2
Press the [Function] (Exit) button, getting its indicator to light.
3
If necessary, play the metronome sound (p. 41).
4
Press the [Song] (Select -) button or [ ] (Select +) button to
display the RECORD screen.
fig.04-010d
5
Press the [Enter] button.
The following screen appears, and the RG-1 goes into recording standby.
fig.04-020d
6
Press the [Song] (Select -) button or [ ] (Select +) button to get
the value of the setting for the tempo or beat to flash.
7
Press the [ ] (Value -) button or [ ] (Value +) button to set
the tempo or beat to use during recording.
If the metronome is playing, the metronome’s tempo and beat change to the
tempo and beat you set in this screen.
Recording Performances
NOTE
Use USB memory available
from Roland.
Proper operation cannot be
guaranteed if other external
memory products are used.
RG-1_e.book 62 ページ ２００８年４月８日 火曜日 午後２時３６分