Filter
Top Products
77
Changing Various Settings
7.
Press the [Enter] button.
A confirmation message appears in the screen.
fig.06-160d
If you press the [Function] (Exit) button, none of the data
in User memory, USB memory, or on the floppy disk is
erased, and you’re returned to the previous screen.
8.
Press the [Enter] button once more.
The data in the User memory or USB memory or on the
floppy disk is deleted.
NOTE
Be sure not to turn off the power as long as
“Executing...” is displayed.
You can return the content stored with “Memory Backup” (p.
71) to their original factory settings.
This operation is referred to as “Factory Reset.”
NOTE
When you perform a Factory Reset, all settings that have
been stored in memory up to then are erased and reset to
their factory defaults.
1.
Press the [Function] (Exit) button, getting its
indicator to light.
2.
Press the [Song] (Select -) button or [ ] (Select
+) button to display the FACTORY RESET screen.
3.
Press the [Enter] button.
A confirmation message appears in the screen.
Pressing the [Function] (Exit) button at this point returns
you to the previous screen without Factory Reset being
executed.
4.
Press the [Enter] button once more.
Factory reset is executed.
When the factory reset is complete and the screen shown
below appears, switch the power off, then back on.
NOTE
Never switch off the power until this screen appears.
Value
Description
User
Memory
Contents of the User Memory
Ext
Memory
Contents of the USB memory connected to
the External memory connector
Floppy
Disk
Contents of the Floppy disk
Restoring the Factory Settings
(Factory Reset)
RG-1_e.book 77 ページ ２００８年４月８日 火曜日 午後２時３６分