Filter
Top Products
71
Changing Various Settings
Ordinarily, when playing back SMF music files for Roland
Piano Digital instruments (p. 89), the left-hand part is
assigned to the left-hand track, and the right-hand part is
assigned to the right-hand track. However, right-hand and
left-hand part assignments in certain SMF music files may
differ.
If this is set to “Auto” and the right-hand and left-hand parts
cannot be played smoothly, then change this setting.
→
You can use the Memory Backup function to store these
settings to the RG-1 (p. 71).
1.
Press the [Function] (Exit) button, getting its
indicator to light.
2.
Press the [Song] (Select -) button or [ ] (Select
+) button to select “Track Assign” in the MISC
screen.
fig.06-120d
3.
Press the [ ] (Value -) button or [ ] (Value
+) button to set the track assign.
4.
Press the [Function] (Exit) button so the indicator
goes out.
NOTE
This setting is applied after you change the setting and
select a song.
Normally, the various settings revert to their default values
when the power is turned off.
However, you can specify that the settings will be
remembered even when the power is turned off. This
function is called “Memory Backup.”
For more on the settings stored using Memory Backup,
refer to “Parameters Stored in Memory Backup” (p. 88).
1.
Press the [Function] (Exit) button, getting its
indicator to light.
2.
Press the [Song] (Select -) button or [ ] (Select
+) button to display the MEMORY BACKUP
screen.
3.
Press the [Enter] button.
A confirmation message appears in the screen.
Pressing the [Function] (Exit) button at this point returns
you to the original screen without the settings being
saved.
4.
Press the [Enter] button once more.
Memory Backup is executed.
NOTE
Never turn off the power while “Executing...” is
displayed in the screen.
When Memory Backup is finished, the display and
buttons return to the previous screen.
Changing the Parts Assigned to the Track
During SMF Playback (Track Assign)
Value
Description
Auto
The part assigned to each track will be deter-
mined automatically, depending on the song
file.
2/1
Assigns Part 1 to the right-hand track, Part 2
to the left-hand track, and the remaining
parts to the A (accompaniment) track.
3/4
Assigns Part 4 to the right-hand track, Part 3
to the left-hand track, and the remaining
parts to the A (accompaniment) track.
Remembering the Settings Even
When the Power is Turned Off
(Memory Backup)
RG-1_e.book 71 ページ ２００８年４月８日 火曜日 午後２時３６分