Filter
Top Products
IntroductionPanel TourSetupProgram/
Manual
Creating
and Storing
9
3.5 GLOBAL Button
This is where you adjust settings for MIDI or the digital output.
Press the GLOBAL button to make it light, and then use the 1/PREV and 2/
NEXT buttons (3.3) to move through the menu items listed below.
After selecting the desired menu item, use value knob 3 or the ▲, ▼ buttons to
change the value. For some menu items, you will also use the 3/√√
√√
and 4/®®
®®
buttons.
3.6 WRITE/ENTER Button
This button is used when you want to store a new program. (p.20)
3.7 TUNER/CANCEL Button
This button turns the built-in chromatic tuner on/off.
You will also use this to abort saving a program, or to cancel a GLOBAL or
UTILITY operation.
3.8 Name Display
This displays program names, effect names, and parameter names.
3.9 Valve Icon
This indicates the number and type of power valves (vacuum tubes used in the
power stage) in the original amp that is being modeled.
3.10 Value Display
This indicates the value of the parameter.
If the displayed parameter value matches the value before you edited it (i.e.,
the value that is stored in the program), the ORIG (original value) icon will
appear.
If you have modified (edited) any parameter of the program, the EDIT icon will
appear.
NR SENS: Noise reduction (p.19)
********: Program name (p.19)
EXP : Expression target (p.42)
EXP MIN: Expression target range (minimum value) (p.42)
EXP MAX: Expression target range (maximum value) (p.42)
EXP INIT: Initialization setting for the expression pedal (p.42)
MIDI CH: Set the MIDI channel (p.46)
PCHG OUT: Output settings for program change messages (p.46)
CCHG I/O: Output settings for control change messages (p.47)
SYEX OUT: Output settings for system exclusive messages (p.48)
DUMP CUR: Sends the current program data from the MIDI OUT jack (p.48)
DUMP ALL: Sends all ToneLab data from the MIDI OUT jack (p.48)
DOUT LVL: Digital output level (p.50)