Filter
Top Products
40
F. REVERB EFFECTS
Here you can make settings for the reverb effect that is played after the cabinet.
You can choose one of three types of reverb.
1. OFF
Select this if you don’t want to use the reverb effect.
2. SPRING
A model of the most popular spring reverb system used in guitar amps.
3. ROOM
Emulates the natural reverberation that takes place in a medium sized room/small
hall.
4. PLATE
An unerringly accurate model of the plate reverb used in countless, professional
recording studios
.
(EX):
This indicates a parameter that you can control from the expression pedal
of the optional foot controller.
REVERB LO DAMP: knob 1 MIX: knob 2 HI DAMP: knob 3
SPRING/ROOM/PLATE “LO DAMP” 0.0...10.0 “MIX” 0.0...10.0 “HI DAMP” 0.0...10.0
[1] “LO DAMP” 0.0...10.0 Adjusts the dampening of the low-frequency range.
[2] “MIX” 0.0...10.0 Adjusts the mix amount of the reverb sound.
[3] “HI DAMP” 0.0...10.0 Adjusts the dampening of the high-frequency range.
INPUT LEVEL
(EX)
This is the input level of the reverb controlled by the
optional foot controller.