Filter
Top Products
CGP-1000 Owner’s Manual
14
Introduction
Playing the Keyboard
1 Connecting the power cable
First insert the plug of the power cable into the AC connector on the Clavinova,
then plug the other end of the cable into the proper AC outlet on the wall.
2 Opening the key cover
Using the hand grip on the front, lift open the key cover.
If you want to play in this condition (with the panel unopened), go on to step 4.
3 Opening the panel
Fold down the hand grip at the top (as shown), then grip the key cover at the
bottom and lift it, gently pushing it inside the CGP-1000, revealing the con-
trol panel.
4 Turning the power on
Press the [POWER] switch located on the right of the keyboard to turn the
power on. The display located in the center of the front panel and the power
indicator located below the left end of the keyboard lights up.
(The shape of the plug and outlet
differ depending on locale.)
CAUTION
Hold the cover with both
hands when opening or clos-
ing it. Do not release it until it
is fully opened or closed. Be
careful to avoid catching fin-
gers (yours or others, espe-
cially children’s) between the
cover and the unit.
CAUTION
Do not place objects such as a
piece of metal or paper on
top of the key cover. Small
objects placed on the key
cover may fall inside the unit
when the cover is opened and
may be nearly impossible to
remove. This could cause elec-
tric shock, short circuit, fire or
other serious damage to the
instrument.
CAUTION
Be careful to avoid catching your
fingers when opening the cover.
Fold down the hand grip.
CAUTION
Be careful to avoid catching your
fingers when opening the cover.
The power indicator lights up.